Clock Button; Light Button - GE AIR Z09 IN EH Owner's Manual And Installation Instructions

Remote controller
‘
’
“
”
•
1 1
12
6. JET button
In COOL or HEAT mode, press this button to let the
air-conditioner run at its full capacity. Change MODE
or fan speed to stop this operation.
Note: The air-conditioner runs at its
full capacity continuously under
this mode. Press MODE or FAN
button to go back to its previous
operating mode.
7. TIMER ON, OFF buttons
When the unit is in off status, press TIMER ON button to
turn it on at the specified time up to 24 hours in
advance. Press TEMP buttons and select TIMER ON
time. Then, press TIMER ON button once more to
confirm the time.
When the unit is operating, press TIMER OFF button to
turn it off at the specified time up to 24 hours in
advance.
8. SURROUND button
Press this button to let the air-conditioner control the
rate of cooling or heating with extra input on
surrounding room temperature from the remote
controller. Press this button once more to stop the
operation.
9. SLEEP button
Press to set the sleep function.
Press once more to stop the sleep function.
10. SWING button
Press to start louver moving automatically.
Press again to stop louver moving.

11. CLOCK button

Press to set the current time in the remote controller.
Adjust current time with TEMP buttons. Time changes
with 1 minute interval each time TEMP buttons are
pressed. Time changes with 10 minute interval when
TEMP buttons are pressed for 2 seconds or longer

12. LIGHT button

Press to turn off or on the LED display
on the indoor unit.
7