Remote Control - GE AIR Z09 IN EH Owner's Manual And Installation Instructions

Remote control

General remarks
• Be sure there are no obstructions
between the receiver and the remote
control unit. The unit has a range of
approximately 8 meters.
• Do not expose the remote control unit to
moisture, excessive direct sunlight or heat.
Remote controller
6
• Do not drop or throw the remote
control unit.
• When restarting, the unit resumes
operating on the last mode set before
shut down. The outdoor unit will restart in
approximately 30 seconds.
1. ON/OFF button
Press this button to turn the unit on or off.
2. FAN button
Press this button to change fan speed. There are three
speeds to choose from, or set the FAN to AUTO to let the
unit control the air flow.
3. MODE button
Select the desired mode of operation by pressing this

button. The unit can operate on: COOL, DRY, FAN or
HEAT modes.

COOL mode
DRY mode
FAN mode
HEAT mode
Ž
4. AUTO button

Press this button to enter AUTO mode operation. In
AUTO mode, the microcomputer automatically controls
the rate of cooling and heating of the room. Press once
Œ
more to return to the previous operating mode.
5. TEMP buttons
Press PLUS ( ) or MINUS ( ) button to set temperature
up or down. Temperature can be set from 16°C to 30°C
in COOL, DRY and HEAT modes.