Cisco Catalyst 4500 series Overview page 44

Switching Module LEDs
Figure 1-40 Gigabit Ethernet Port and Status LEDs
WS-X4306-GB GIGABIT ETHERNET
1000BASE-X SWITCHING MODULE
Figure 1-41 10/100BASE-T Port LEDs
WS-X4148-RJ
Table 1-3
LED
STATUS
LINK
Catalyst 4500 Series Module Installation Guide
1-44
STATUS
1
STATUS
Switching Module LEDs
Color/State Description
Green
Red
Orange
1
Green
Orange
Flashing
orange
Off
Chapter 1
2
4 PORT
10/100 B
Indicates the results of a series of self-tests and
diagnostic tests performed by the switch.
All the tests pass.
A test other than an individual port test failed.
System boot, self-test diagnostics running, or the
module is disabled.
Indicates the status of the 10BASE-T port.
The port is operational (a signal is detected).
The link has been disabled by software.
The link has been disabled due to a hardware failure.
No signal is detected.
Module Overview and Specifications
3
78-13267-06