Ws-U4504-Fx-Mt Uplink Module - Cisco Catalyst 4500 series Overview

Ethernet and Fast Ethernet Switching Modules

WS-U4504-FX-MT Uplink Module

Figure 1-26 WS-U4504-FX-MT Uplink Module
WS-U4504-FX-MT
Catalyst 4500 Series Module Installation Guide
1-28
The WS-U4504-FX-MT uplink module (see
specifications:
Specification
Module type
Port duplex mode
Port speed
Number of ports
Connector type
Cable type
The WS-U4504-FX-MT uplink module is installed onto a switching module to
provide optional port configurations.
Each port has a port link status LED below it, which is labeled N+x. The N
indicates the last number of the port that is used on the Ethernet switching module
(WS-X4232-RJ-XX).
For the far left port on the WS-U4504-FX-MT uplink module, add 1 to that
number; for the second port, add 2; for the third port, add 3; for the last port, add 4.
Chapter 1
Figure
Description
100BASE-FX uplink module
Half or full duplex mode
100 Mbps
4
MT-RJ (See Figure 2-4 on page
MMF cable
Module Overview and Specifications
1-26) has the following
2-4.)
78-13267-06