Network Timing Interfaces; Rsp Interfaces - Cisco ASR 903 Hardware Installation Manual

Cisco ASR 903 Router Features

Network Timing Interfaces

The RSP supports the following network timing interfaces:
•
•
•
•
Network timing interfaces support redundancy in a redundant RSP configuration. Network timing
interfaces on a redundant RSP remain in operation while the RSP is in hot standby mode.

RSP Interfaces

Figure 1-3
Figure 1-3
Label
1
2
3
4
5
6
7
8
9
10
For more information about installing the RSP, see
about the RSP LEDs, see
Cisco ASR 903 Router Hardware Installation Guide
1-8
BITS input/output port—RJ48 jack
1 PPS input and output—Mini coax connectors
2.048 or 10 MHz input and output—Mini coax connectors
Time of Day (ToD) or 1 PPS input or output port—Shielded RJ45 jack
summarizes the interfaces on the RSP module.
RSP Interfaces Summary
1 2
RUDY RSP
MEM
Interface
USB memory port
USB console port
Console port
1 PPS input timing port
1 PPS output timing port
10 MHz input timing port
10 MHz output timing port
Time of Day (ToD) timing port
BITS timing port
Ethernet management port
RSP LEDs, page
3 4 5 6
1PPS 1PPS 1OMHZ
IN OUT IN
CONSOLE
RSP Installation, page
5-7.
Chapter 1 Cisco ASR 903 Router Overview
7 8 9 10
1OMHZ
OUT
TOD BITS MGMT
ENET
3-10. For more information
SYNC
ACT
PWR
STAT
OL-25178-04