Prime Line Assignment - NEC Xen Alpha Features And Specifications Manual

P-4

Prime Line Assignment

Xen Alpha
F Prime Line Assignment allows a user to go off-hook and make an external call from a trunk
EATURE
D
ESCRIPTION line without pressing a line key. The system is programmed to automatically select a
specified trunk line when the user goes off-hook. Internal calls are made by pressing
which accesses internal dialtone.
S This feature is available for all Multiline telephones and single line telephones.
TATION
A
PPLICATION
O
PERATING
P
ROCEDURES
Making an external call:
1.
Making an internal call:
1.
2.
R All programming functions associated with this feature are listed in the following table. Some
ELATED
P functions must be programmed before the feature is operational and other functions are
ROGRAMMING
optional. The optional functions can affect how the feature operates.
!
S
ERVICE
C
ONDITIONS
!
Features & Specifications, Prime Line Assignment
A6-506000-642-02
Lift the handset. The outside line is automatically seized.
N
Press to access internal dialtone.
Remain on the speakerphone or lift the handset and dial the desired extension number.
Function
Number
209 Outgoing Call Priority Mode
331 → 336 Automatic Line Selection for Trunk Lines 1 → 6
At default all telephones are set to seize the first available external line.
If a telephone is assigned to seize an external line, preset dialling is performed after the
user dials the number and then lifts the handset.
Function Name
Release 1.0
N
Required
(Y)es or
(N)o
N
N
P-4, Page 181