D-Link Powerline HD DHP-300 Quick Install Manual page 11

Configure the PLC connected nodes first (the remote DHP-300 which
is not connected to the PC), and configure the ETH connected node
last (the local DHP-300 connected to the PC).
Note: If you configure the ETH
node first and change the Net
ID or Encryption Key, you will
not have access the the PLC
nodes.
To configure a DHP-300, select it
and click Next to continue.
Click Next
This screen shows the current
configuration of the DHP-300.
You can modify any of the
parameters and click Next to
save your configuration.
• Net ID:
Powerline network name
(case sensitive).
Default is DHP-300.
• Encryption Key:
Powerline network password (alphanumeric).
Default is DHP-300.
• Password:
Configuration Assistant password (alphanumeric).
Default is admin.
• Alias:
Device name (case sensitive).
Default is Device 1, Device 2, etc...
Click Next
11 D-Link DHP-300 Quick Install Guide
Configuration