• 233MHz processor and at least 64MB of RAM • An available Ethernet Adapter (100MBit/s) Package Contents CD-ROM with Manual and DHP-300 Installation Wizard Powerline HD Ethernet Adapter CAT5 Ethernet Cable If any of the above items are missing, please contact your reseller. D-Link DHP-300 Quick Install Guide...
Ethernet LED A solid light indicates a connection on the Ethernet port. The LED blinks during data transmission. Powerline LED A solid light indicates that the device has detected another Powerline device on the network. D-Link DHP-300 Quick Install Guide...
Page 4
Hardware Overview Ethernet Connect CAT5 Ethernet cable to the DHP-300 Ethernet port. D-Link DHP-300 Quick Install Guide...
Connect the included Ethernet cable to the network cable connector located on the DHP-300 and attach the other end of the Ethernet cable to the network or PC. Note: Network Connectivity is confirmed when the green Powerline LED indicator on the DHP-300 is illuminated. D-Link DHP-300 Quick Install Guide...
Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process. Insert the D-Link DHP-300 Powerline HD Ethernet Adapter CD into your CD-ROM drive. If the CD Autorun function does not automatically start on your computer, click Windows Start >...
Page 7
Setup will install to the default location: C:\Program Files\D-Link DHP-300\DHP-300 PLC Utility, where C: represents the drive letter of your hard drive. To install to a different location click Browse and specify the location. Click Next Click Next D-Link DHP-300 Quick Install Guide...
Page 8
Software Installation The WinPcap 3.1 installation is necessary to run the D-Link DHP-300 Utility, click Next to continue with the installation. Click Next Click I Agree D-Link DHP-300 Quick Install Guide...
Page 9
Software Installation The WinPcap 3.1 Installation is complete. Click Finish to close the wizard. Click Finish The installation wizard is now complete click Finish. Click Finish D-Link DHP-300 Quick Install Guide...
Page 10
Configuration Configuration After you have completed the D-Link DHP-300 Utility installation wizard, double-click the D-Link DHP-300 PLC Utility icon on your desktop to start the configuration of the DHP-300. Double-click the D-Link DHP-300 PLC Utility The utility provides you with the...
Page 11
Default is DHP-300. • Encryption Key: Powerline network password (alphanumeric). Default is DHP-300. • Password: Configuration Assistant password (alphanumeric). Default is admin. • Alias: Device name (case sensitive). Default is Device 1, Device 2, etc... Click Next D-Link DHP-300 Quick Install Guide...
Page 12
Click the Next button to continue. Once all nodes are configured, click Finish to close the utility. Click Next D-Link DHP-300 Quick Install Guide...