Horizon Fitness E401 User Manual page 6

ASS E MB LY ST EP 4
TEFLON WASHERS (E)
FLAT WASHER (F)
BOLT (G)
LINK ARM BRACKET
SPACER (D)
LOWER LINK ARM
PEDAL ARM
A Open HARDWARE BAG FOR STEP 4.
B Align the bracket on the LEFT LOWER LINK ARM with the tube on the LEFT PEDAL ARM.
C Slide the SPACER (D) through the LINK ARM BRACKET and the PEDAL ARM so it can't rotate.
D Insert 2 TEFLON WASHERS (E) between the PEDAL ARM and the LINK ARM BRACKET.
E Secure the joint with a FLAT WASHER (F) and BOLT (G).
F Repeat on the other side.
HARDWARE BAG FOR STEP 4 CONTENTS :
10
E401_Rev.1.5.indd 10-11
PEDAL ARM TUBE
SPACER (D) TEFLON WASHER (E)
Qty: 2 30 mm
Qty: 4
FLAT WASHER (F) BOLT (G)
35 mm 15 mm
Qty: 2 Qty: 2
ASSEMBLY STEP 
GUIDE RAIL
LOWER LINK ARM
A Open HARDWARE BAG FOR STEP .
B Slide SPACER (H) into LOWER LINK ARM.
C Place TEFLON WASHERS (I) on either side of SPACER (H). While holding TEFLON WASHERS (I) slide LOWER
LINK ARM into bottom end of LOWER HANDLEBAR.
D Insert BOLT (J) into LOWER HANDLEBAR and secure using NUT (K).
E Repeat on other side.
HARDWARE BAG FOR STEP  CONTENTS :
SPACER (H)
44 mm
Qty: 2
LOWER
LOWER LINK ARM
HANDLEBAR
TEFLON WASHERS
SPACER
BOLT (J)
LOWER HANDLEBAR
NUT (K)
SPACER (H)
TEFLON WASHERS (I)
TEFLON WASHER (I)
28.4 mm
Qty: 4
NUT (K)
BOLT (J)
INSIDE DIAMETER:
60 mm
8 mm
Qty: 2
Qty: 2
11
2/29/08 10:05:37 AM