Reserve Lan Ip Addresses - NETGEAR C3700 User Manual

4. Select ADVANCED > Setup > LAN Setup.
5. Specify the range of IP addresses that the modem router assigns:
a. In the Starting IP Address field, type the lowest number in the range.
This IP address must be in the same subnet as the modem router.
b. In the Ending IP Address field, type the number at the end of the range of IP
addresses.
This IP address must be in the same subnet as the modem router.
6. Click the Apply button.
Your settings are saved.
The modem router delivers the following parameters to any LAN device that requests DHCP:
• An IP address from the range that you have defined
• Subnet mask
• Gateway IP address (the modem router's LAN IP address)
• DNS server IP address (the modem router's LAN IP address)

Reserve LAN IP Addresses

When you specify a reserved IP address for a computer on the LAN, that computer always
receives the same IP address each time it accesses the modem router's DHCP server.
Assign reserved IP addresses to computers or servers that require permanent IP settings.

To reserve an IP address:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://routerlogin.net or http://192.168.0.1.
N600 WiFi Cable Modem Router Model C3700
Specify Network Settings
51