NETGEAR ReadyDATA 516 Hardware Manual page 29

ReadyDATA Desktop Storage Systems
The tray handle pops out.
3. Pull out the disk tray and replace the 2.5-inch HDD or SSD:
a. Remove the screws and the old 2.5-inch HDD or SSD.
b. Place the new 2.5-inch HDD or SSD in the disk tray.
c. Secure the HDD or SSD to the disk tray using the screws.
Make sure that the disk connectors face the interior of the disk tray.
Make sure that the HDD or SSD is installed on the correct side of the disk tray.
Disks
29