Thermostat Information - Honeywell DELUXEHEATPUMP T8511G Installation Instructions Manual

Key to Test
Press Number
Fan Equipment System-Test
40
i
41
40
Key Operation System-Test
IMPORTANT
Test numbers will only be displayed when the system is configured for the selected function.
EXAMPLE: Numbers 60, 61 and 62 are the only numbers that will be displayed when a system
is configured for heat only.
System Key System-Test
i 60
System 61
System 62
System 63
System 64
System 65
Fan Key System-Test
Fan 68
Fan 69
NOTE: Press and hold the increase
system-test will time out after ten minutes without any key presses.

THERMOSTAT INFORMATION

1. Press the Information i key to access the thermo-
stat information.
2. Press the increase
date code. The first two large digits are the month
and the third digit is the last digit of the year (Ex-
ample: 027=February 1997).
Table 4. Installer System-Test Options (Continued) .
Change from cooling to fan equipment system-test.
Fan comes on.
Fan turns off.
Change from cooling or fan to key operation system-test.
Heat Test Number is displayed.
Off Test Number is displayed.
Cool Test Number is displayed.
Auto Test Number is displayed.
Emergency heat Test Number is displayed.
Fan on Test Number is displayed.
Fan off Test Number is displayed.
and decrease
key to display the production
T8511G DELUXE HEAT PUMP ZONE THERMOSTAT
Description
keys together for three seconds to exit the system-test. The
3. Press the increase
software identification code.
4. Press the increase
M4864 software revision number (Example: 001=Revision
number 1).
M10444
7
key again to display the
M4866
key again to display the
69-1052—1
M6791