Figure 3-12 Time Sync Screen - Honeywell HRSD4 User Manual

Configuration
4.
Synchronizing with a Standard Time Server
You can set up time synchronization between the DVR and standard time servers that
are available in most time zones and countries, or between the DVR and another DVR.
1.
2.
3.
4.
5.
Document 800-00919 Rev F
02/08
Delete dates by highlighting the X beside the date and pressing
Note Holidays that do not fall on the same date each year should be
updated once the current year's holiday has passed.
Highlight the Time Sync... field in the Date/Time Setup screen, and press
The Time Sync screen appears.
Figure 3-12
Highlight the field beside Automatic Time Sync and press
Automatic Time Sync On and Off.
Highlight the field beside SNTP Server and press
highlighting them and using the Up and Down arrows to increase or decrease the
number value.
Highlight the field beside Interval and press
synchronization from 30 to 300 minutes.
The field beside System Clock displays the time setting of the DVR.
The field beside Server Clock displays the time setting of the time server.
Highlight Update and press
The Server Clock displays " - " when the DVR cannot load the
Note
time information from the time server.
Time Sync Screen
to update the server clock.
.
to toggle the
. Change the numbers by
. Set the time interval for
.
43