U
PLOADING AND
Uploading Settings via MetroSet2
†
The upload
feature in MetroSet2 allows the user to retrieve the current software
number and configuration settings of an access point device connected to a
personal computer.
To upload settings via MetroSet2:
1.
Verify the access point device is
connected to the host system and a
communication link has been
established with a scanner.
2.
Start the MetroSet2 software.
3.
Click on the plus sign (+) next to POS
Scanners to expand the supported
scanner list.
4.
Choose the Focus BT with Access
‡
Point
from the list.
5.
Click on the Upload button.
6.
A communications window will open
displaying the progress of the upload.
A message will appear in the window
when the upgrade is complete.
7.
Click on the Tools menu at the top of the
screen.
8.
Select View Current Settings from the
drop down list.
9.
The Scanner Settings window will open
listing the custom settings uploaded
from the access point device. Default
settings will not be listed (see example
in
).
Figure 13
All the settings shown in
and will differ depending upon the configuration.
† Minimum system requirements: A personal computer with Microsoft
®
Windows
95 or greater with an available RS232 serial or USB port and
MetroSet2 (minimum software version 3.2.016).
‡ Scanner model is application dependent.
D
OWNLOADING
Figure 13
S
ETTINGS
Figure 12. Scanner Communications
Figure 13. Scanner Settings
are for illustrative purposes only
®
15