Temperature Setpoint Overrides - Honeywell T7351 User Manual

5. Press Not Occupied Heat.
6. Press up or down
temperature is displayed.
7. Press Not Occupied Cool.
8. Press up or down
temperature is displayed.
9. Press Run Schedule.
Temperature Setpoint
Overrides
IMPORTANT
— Setup determines Occupied override
duration.
— Default duration is three hours.
NOTE: To cancel Override and immediately
return to the program, press Run
Schedule.
63-2652—01
until the desired
until the desired
10
TR23 Setpoint Knob
A TR23 setpoint knob can remotely adjust the
T7350 setpoint. This adjustment can be made
when the sensor is in override.
NOTES:
— During override, only occupied and
standby heat setpoints, and cool
setpoints are adjusted.
— The maximum adjustment is ±5 °F
(±3 °C).
— With a disconnected or failed TR23
or a T7350 set for local tempera-
ture sensing, offset is zero.