Cutter Deck Removal - Honda H3011H Owner's Manual

Cutter deck removal
1. Position the front wheel straight ahead and lower the cutter deck.
2. Move the P.T.O. lever to OFF (disengaged), and remove the belt
stopper.
BELT STOPPER
3. Remove the lock pins, collar, and washers, then remove the clutch rod
from the cutter deck.
4. Remove the four lock pins (two pins for right and left sides respectively)
and washer from the right and left sides of the cutter deck.
CLUTCH ROD
WASHER
14 mm
COLLAR
LOCK PIN
CUTTER DECK
7 mm LOCK PIN
WASHER
56