Honda H3011H Owner's Manual page 71

Engine overheats;
1. Cooling air intake
plugged. -Clean cooling air intake (see page
19).
2. Engine overloaded.
* Shift to lower speed.
3. Low engine
oil level. -Fill with recommended oil (see page
20).
4. Spark plug improperly
- Regap plug or replace (see page 50).
gapped.
5. Cooling
fan damage. -See your authorized HONDA riding
mower dealer.
Oil consumption
1. Incorrect oil viscosity.-
Use specified viscosity oil. (see page
21)
2. Oil leaks.
) Check for oil leaks from drain bolt.
(see page 20)
3. Worn piston
ring, etc. -See your authorized HONDA riding
mower dealer.
Erratic operation;
1. Dirty fuel.
*See your authorized HONDA riding
mower dealer.
2. Dirty air cleaner elements. -Clean air cleaner elements.
(see page 49).
3. Spark plug faulty
or - Regap plug or replace. (see page 50).
improperly gapped.
Excessive vibration;
1. Loose blade or engine - Retighten blade bolts or engine moun-
mounting hardware.
ting hardware.
2. Blade damaged
or out of -Replace blade or see your authorized
balance.
HONDA riding mower dealer.
3. Belt damaged.
c Replace belt.
4. Each pulley damaged
or -See your authorized HONDA riding
pulleys not aligned.
mower dealer.
Battery will not charge;
1. Dead cell in battery.-
Replace battery.
2. Loose electrical
connec- -Check connections and wires.
tions or broken wire.
69