Honda 2005 Odyssey Owner's Manual page 221

Main Menu
Table of Contents
Playing a CD, CD Changer
Random Play
When you press the RDM button or
touch the TRACK RANDOM icon on
the upper display, the system plays
the tracks of the current disc in
random order. You will see
RANDOM (TRACK RANDOM) in
the display. To turn this feature off,
press the RDM button (touch
TRACK RANDOM) again.
Operation of TRACK SCAN, DISC
SCAN, TRACK REPEAT, DISC
REPEAT, and TRACK RANDOM on
the upper display is possible only
when the audio display is in the
upright position.
To Stop Playing a Disc
To take the system out of CD mode,
press the AM/FM button or SAT
RADIO button (U.S. models). Each
time you press the AM/FM button,
the system changes to the next
mode (AM, FM1, or FM2). When
you return to CD mode by pressing
the CD button, play will continue
220
where it left off.
If you turn the system off while a CD
is playing, either with the PWR/VOL
knob or the ignition switch, play will
continue at the same point when you
turn it back on.
Removing CDs from the Changer
To remove the disc that is currently
playing, press the eject button. You
will see ''EJECT'' in the display.
When you remove the disc from the
slot, the system automatically begins
the load sequence so you can load
another disc in that position. If you
do not load another CD, within 15
seconds, the system selects the
previous mode [AM, FM1, FM2, or
XM Radio (U.S. models)].
If you do not remove the CD from
the slot, the system will reload the
CD after 15 seconds and put the CD
changer in pause mode. To begin
playing the CD, press the CD button.
To remove the disc from the
changer, first select it by pressing
the appropriate disc button or
corresponding number on the preset
button. When that disc begins
playing, press the eject button.
When you press the eject button
while listening to the radio, or with
the audio system turned off, the disc
that was last selected is ejected.
After that disc is ejected, pressing
the eject button again will eject the
next disc in numerical order. By
doing this six times, you can remove
all the discs from the changer.
You can also eject discs when the
ignition switch is on or off:
To eject one disc, press and release
the eject button.
To eject all discs, press and hold the
eject button until the indicators
above the disc buttons blink.