Table of Contents
Advertisement
Placing the System in the Valet Mode
(Valet Mode can be changed only from
Automatic Arming Mode)
1
2
2
3
3
4625051B
4
4625060B
© 2004 American Honda Motor Co., Inc. - All Rights Reserved.
NOTE: Steps 1 and 2 must be completed within 5 seconds.
Remove the ignition key from the ignition switch.
Press the UNLOCK button on the remote control transmitter three times.
The Status LED flashes once, indicating that the system is ready to change the mode.
Status
LED
Exit the vehicle and close the door. (The system is changed to Valet mode.)
• When the security system is placed in the valet mode, it is temporarily
placed on hold. When in the valet mode, the system cannot be armed,
but panic mode is still functional. This is a convenient feature if the car
is to be washed, serviced, or valet parked.
• Before removing the ignition key, opening/closing of the door or
tailgate is not related to set valet mode.
Valet
7
Advertisement
Table of Contents
