Table of Contents
Advertisement
System Controls
Arming Mode
(AUTOMATIC
MANUAL)
ON
1
LOCK
2
4625030B
3
4
5
6
7
6
This section explains how to change the arming mode from AUTOMATIC to MANUAL.
Turn the ignition key from the ON (II) position to the LOCK (0) position.
Remove the key from the ignition switch.
Status
Open a door or the tailgate and close it. (The EXIT delay starts.)
LED
Check that the status LED blinks.
4625051B
NOTE: Steps 3 thru 7 must be completed within 5 seconds.
Insert the ignition key.
Remove the ignition key from the ignition switch. (All the way out)
Insert the ignition key.
Remove the ignition key from the ignition switch. (All the way out)
Insert the ignition key.
Observe that the system beeps
twice.
4625020B
The switching procedure is
AUTOMATIC MODE
Not completed
MANUAL MODE
Completed
© 2004 American Honda Motor Co., Inc. - All Rights Reserved.
The result
No beep
Beep twice
Advertisement
Table of Contents
