Honda 2009 S2000 Owner's Manual page 84

Main Menu Table Of Contents
POSITIONING HOLE
10. Carefully set the removable
hardtop on the vehicle, making
sure the lock rods go into the
positioning holes behind each door.
Be careful not to pinch your
fingers.
Make sure that the lock rods do not
damage any part of the vehicle, such as
the rear wing spoiler, when you install
or remove the hardtop.
TAB LATCH
LOCKING LEVER
11. Push in the tab on each locking
lever and pull the locking lever
down.
12. Push the locking lever forward
and set the latch into the
windshield header.
Pull back on the locking lever and
13.
push it up until it latches. Make
sure it is securely latched.
2009 S2000
Removable Hardtop
LOCK ROD REAR WINDOW
DEFOGGER WIRE
14. Pivot the lock rods backward to
lock down the sides of the hardtop.
Make sure the rear window
defogger wire is set under the lock
rod to ensure the wire is not
crushed or entangled.
CONTINUED
81