Honda 2009 S2000 Owner's Manual page 187

Main Menu Table Of Contents
Lights, Cleaning the Seat Belts
7. Install the new bulb into the
socket.
Push the socket into the light
8.
assembly, and turn it clockwise
until it locks.
9. Turn on the lights to make sure
the new bulb is working.
184
10. Install the trunk lining, and secure
it with the fasteners. To reinstall a
fastener, reset the fastener by
pushing on the pointed end until it
pops back almost flush with the
fingers on the housing. Put the
fastener in the hole of the trunk
lining, and push on the center until
it locks (the center is flush with
the head).
2009 S2000
Cleaning the Seat Belts
If your seat belts get dirty, use a soft
brush with a mixture of mild soap
and warm water to clean them. Do
not use bleach, dye, or cleaning
solvents. Let the belts air-dry before
you use the vehicle.
Dirt build-up in the loops of the seat
belt anchors can cause the belts to
retract slowly. Wipe the insides of
the loops with a clean cloth
dampened in mild soap and warm
water or isopropyl alcohol.