Radius Configuration - GE MDS iNET 900 Reference Manual

05-2806A01, Rev. J
This menu is the same for both Access Points and Remotes and the
names change to reflect their mode. Replace "Remotes" with Access
Points" in the following description.
NOTE: The limit for Remotes (in an Access Point radio) is 255. The
limit for Access Points (in a Remote radio) is 104.
Figure 2-45. Approved Remotes List Menu
• —Enter MAC address of Remote.
Add Remote
[
Any valid 6-digit hexadecimal MAC address; 00:00:00:00:00:00
• —Enter MAC address of Remote. For security
Delete Remote
purposes, you may want to delete a stolen or deprovisioned
radio from this list.
•
Add Associated Remotes
the approved remote list. Alternatively, you can enter each
Remote MAC manually.
•
Delete All Remotes
from current list.
•
View Approved Remotes
MAC address, of radios authorized to join this AP. If a Remote
is not in this list, it will not be able to associate with this AP.
• —Saves all changes made during the session with
Save Changes
this menu. Changes are implemented only if they are "saved"
before exiting this menu.

2.7.3 RADIUS Configuration

This section covers the authentication settings needed for the iNET
radios to access the RADIUS server, which is used for Device Level
Security and for Wireless Access Security. GE MDS does not provide
the RADIUS server software.
iNET Series Reference Manual
—Add all currently associated remotes to
—Remove (complete purge) of all Remotes
—Simple listing of approved Remotes by
]
81