Debug Ilpower Controller - Cisco Catalyst 3550 Command Reference Manual

debug ilpower controller

debug ilpower controller
Use the debug ilpower controller privileged EXEC command to enable debugging of the
platform-specific Power over Ethernet (PoE) software module on the Catalyst 3550-24PWR switch in
long message format. These messages include the Power Controller register reading. Use the no form of
this command to disable debugging.
Syntax Description This command has no arguments or keywords.
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.1(12c)EA1
Usage Guidelines
The undebug ilpower controller command is the same as the no debug ilpower controller.
Related Commands Command
debug ilpower event
Catalyst 3550 Multilayer Switch Command Reference
B-16
debug ilpower controller
no debug ilpower controller
Modification
This command was introduced.
Description
Enables debugging of the platform-specific PoE software module in a
short message format.
Appendix B Catalyst 3550 Switch Debug Commands
OL-8566-02