Remote Control Transmitter (If Equipped); Receiver (If Equipped); Yamaha Security System Lock And Unlock Mode (If Equipped) - Yamaha F200 Owner's Manual

EMU38591
Remote control transmitter (if
equipped)
The lock and unlock modes of the Yamaha
Security System are selected using the re-
mote control transmitter. While the engine is
running, input from the remote control trans-
mitter is not received.
Store the remote control transmitter carefully
so it will not be lost.
ECM02100
NOTICE
The remote control transmitter is not
●
completely waterproof. Do not sub-
merge the transmitter or operate it un-
derwater. If
submerged, dry it with a soft, dry cloth,
and then check that it is operating prop-
erly. If the transmitter is not operating
properly, contact a Yamaha dealer.
Keep the remote control transmitter
●
away from high temperatures and do not
place it in direct sunlight.
Do not drop the remote control transmit-
●
ter, subject it to strong shocks, or place
any heavy items on it.
Use a soft, dry cloth to clean the remote
●
control transmitter. Do not use deter-
gent, alcohol, or other chemicals.
ZMU06455
the transmitter
Do not attempt to disassemble the re-
●
mote control transmitter yourself. Other-
wise, the transmitter may not operate
properly. If the transmitter needs a new
battery, contact a Yamaha dealer.
If you have lost the remote control trans-
●
mitter, consult your Yamaha dealer.
Keep the least 2 transmitters at all the
time. If you have lost both transmitters,
consult your Yamaha dealer.
TIP:
Since the receiver is programmed to recog-
●
nize the internal code from this transmitter
only, the security system setting can only
be changed with this transmitter. If the re-
mote control transmitter does not operate
properly, contact a Yamaha dealer.
Replace the battery cell after 1 year, and
●
every two years thereafter as a standard
measure.
Refer to local hazardous waste regulations
●
when disposing of transmitter batteries.
The Yamaha Security System permits to
●
register up to 5 remote control transmitters.
is
Consult your yamaha dealer for details.
EMU38601

Receiver (if equipped)

The receiver control the ECM (Electronic con-
trol module) to prevent the engine from start-
ing. Consult your Yamaha dealer for
installation of the receiver.
EMU38611
Yamaha Security System lock and un-
lock mode (if equipped)
The Yamaha Security System settings are se-
lected by pressing the lock or unlock button
on the remote control transmitter briefly.
Components
26