Treatment Of Submerged Motor - Yamaha F200 Owner's Manual

1
2
3
1. O-ring
2. Filter cup
3. Water detection switch lead
7. Connect the water detection switch cou-
pler securely until a click is heard.
8. Install the top cowling.
9. Turn the main switch to the "
sition and check that the water separator-
alert indicator remains off and the buzzer
does not sound. If the water separator-
alert indicator blinks or the buzzer
sounds, have your Yamaha dealer check
the outboard motor. NOTICE: Although
the buzzer will stop when the engine is
started and the remote control lever is
moved to the forward or reverse posi-
tion, do not use the outboard motor.
Otherwise, serious engine damage
could occur.
[ECM02390]
EMU33501

Treatment of submerged motor

If the outboard motor is submerged, immedi-
ately take it to a Yamaha dealer. Otherwise
some corrosion may begin almost immediate-
ly. NOTICE: Do not attempt to run the out-
board motor until it has been completely
inspected.
[ECM00401]
ZMU07791
" (on) po-
Trouble Recovery
102