Readyshare Printer - NETGEAR D6300 Installation Manual

ReadySHARE Printer

The USB Control Center utility allows you to control a shared USB
device from your computer that is connected to the USB port on your
router. The utility allows you to control a printer.
Install the utility on each computer on your network from which you
want to control the device. You can download this utility at
www.netgear.com/landing/en-us/readyshare.aspx.
When you launch the USB Control Center utility, a screen similar to
the following displays:
The main screen shows a device icon, the description for this USB
device, and its status.
Available. The device is available from the computer that you are
using.
Waiting to Connect. You need to connect to this device from the
computer that you are using. The first time you connect, you might be
prompted to install the device driver.
The following menu selections are available:
• System. Exit the utility.
• Tools. Access the Control Center Configuration to set up your
shared USB device. See the following section,
Configuration.
• About. View details about the USB Control Center software.
12
Control Center