Clear Access_Control; Clear Ssh_Key - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
The parameter [IOB| GSPB] is not supported.
Unable to add the specified SB to the partition due to CPU composition abnormal.
Unable to add the specified SB to the partition due to DIMM composition abnormal.
Unable to add the specified SB to the partition due to DIMM does not satisfy requirements of Mirror
Mode.
Unable to add the specified SB to the partition due to SB composition abnormal.
Unable to add the specified SB to the partition due to VRM composition abnormal.
2.2.2

clear access_control

The clear access_control command clears the access control setting.
Privileges: Administrator
(1) Syntax
clear access_control
(2) Options
None
(3) Usage example
None
(4) Messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
Unable to execute this command on a standby MMB.
The specified parameter is invalid.
2.2.3

clear ssh_key

The clear ssh_key command deletes the public key of the SSH public key certificate registered for the login user.
Privileges: User
(1) Syntax
clear ssh_key
(2) Options
None
229 C122-E110-10EN