PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
FIGURE 1.75 [Add Filter] window
TABLE 1.119 Setting and display items in the [Add Filter] window
Item
Protocol
Sets the protocol for the IP filtering. You can select one of the following items from the
pull-down menu:
Access Control
Sets whether to execute access control.
IP Address
Sets the IP address (for IPv4 or IPv6) that will have permission to connect.
Remarks
For IPv4, to permit connection by only a specific IP address in a subnet, specify the IP
address and then "255.255.255.255" in [Subnet Mask]. For IPv6, the prefix length is
displayed.
Example: Permitting access from a specific IP address range (e.g.,
192.168.60.60/255.255.255.0)
IP Address: 192.168.60.60
Subnet Mask: 255.255.255.0
- HTTP
- HTTPS
- Telnet
- SSH
- SNMP
- Disable: Permits access by all IP addresses via the protocol selected in [Protocol].
Selecting this disables input to [IP Address] and [Subnet Mask].
- Enable: Specifies [IP Address] and [Subnet Mask] to permit access via the protocol
selected in [Protocol].
198
Description
C122-E110-10EN