Husqvarna 42" Collection System Operator And Parts Manual page 8

3
INSTALLING DRIVE BELT
NOTE: The kit provides parts for both the 42" and 48".
Refer to the parts list on page 14 for the correct belt for
your needs.
1. Place the belt over the pulley on the deck. Refer
to illustration for proper routing.
2. Move the tension release arm to the rear and
engage in the latch.
Tension
Release Arm
Idler Pulleys
Rear of Deck
8
ASSEMBLY
4
1. Place the deck belt shield on the deck over the
2. Place retainer on the outer pulley cover.
3. Align the tab end of the belt cover into the slot on
4. Secure with knob.
Outer Pulley
Deck Belt Shield
8063-074
Twist in Belt
INSTALLING BELT COVERS
drive pulley and secure with hardware removed
from steel belt shield.
the deck belt shield and the other end over the
end of the outer pulley cover.
Belt
Cover Tab
Outer Pulley Cover
Retainer
8063-079