Husqvarna 42" Collection System Operator And Parts Manual page 10

8
INSTALLING SPACER PLUGS
1. Remove plastic end caps from the center two bag
support arms. Fully insert spacer plugs into the
ends of the support tubes. It may be necessary
to tap the spacers into place with a hammer or
mallet. Replace the plastic end cap back over
the spacer. The additional extension will hold the
hood more securely when latched.
Remove center
end caps
Insert spacers and
replace caps
10
ASSEMBLY
9
CONTAINER INSTALLATION
1. Install containers on support frame, overlapping
containers at center tube.
NOTE: One container should always overlap the other
container at the center tube.
2. Close cover and lock latch handle over support
tubes.
8063-049
Do not leave grass in bagger
containers. Empty containers after
each use and before storing. Failure
to do so may result in spontaneous
combustion which could develop into
a fire.
Grass catcher components are subject
to wear, damage and deterioration,
which could expose moving parts or
allow objects to be thrown. Frequently
check components and replace with
manufacturer's recommended parts,
when necessary.
CAUTION
CAUTION
8063-093