Table of Contents
Related Manuals for Panasonic CZ-64ESMC1U
Summary of Contents for Panasonic CZ-64ESMC1U
-
Page 1: Operating Instructions
Operating Instructions System Controller Model No. CZ-64ESMC1U Before operating the unit, read these operating instructions thoroughly and keep them for future reference. 1006 Kadoma, Kadoma City, Osaka, Japan 85464609159011 CV6233189673... -
Page 2: Table Of Contents
If you have problems or questions concerning your Air Conditioner, you will need the following information. Model and serial numbers are on the nameplate on the bottom of the cabinet. Model No. CZ-64ESMC1U Serial No. Date of purchase Dealer’s address... -
Page 3: Installation Location
INSTALLATION LOCATION • We recommend that this system controller be installed properly by qualifi ed installation technicians in accordance with the Installation Instructions provided with the system controller. • Do not install this system controller where there are fumes or fl ammable gases, WARNING or in an extremely humid space such as a greenhouse. -
Page 4: How To Use The System Controller
HOW TO USE THE SYSTEM CONTROLLER Functions of buttons A: ALL/ZONE/GR B: ZONE select C: GROUP select SELECT button button button F: Operation lamp D: ON button E: OFF button G: MODE button H: Temperature setting buttons M: SET button K: CHECK I: FAN SPEED button button... - Page 5 Functions of buttons (Continued) This button is for turning the selected air conditioner on. D: ON button E: OFF button This button is for turning the selected air conditioner off. F: Operation lamp This lamp lights when the unit is turned on. Use this button to select one of the following fi...
- Page 6 Functions of buttons (Continued) This button is used only when servicing the air conditioner. K: CHECK button Do not use the CHECK button for normal operation. Use this button to inhibit individual operation by remote controller as L: CENTRAL button CTRL follows: 1: Individual ON/OFF operation is inhibited.
-
Page 7: Display
Display Description A: When the unit is in the heating standby mode, the indicator appears. B: The currently selected operation mode is displayed. C: The currently selected FAN SPEED, Airfl ow Direction and SWEEP settings are displayed. D: This indication appears when the fi lter needs cleaning. E: This indication appears only when an abnormality occurs within a unit. -
Page 8: How To Start Group Operation
How to start group operation To start group operation Stop Power Turn the power supply switch on more than 5 hours before starting operation. Press the SELECT button and select GROUP. Select the ZONE No. including the group to be operated by pressing ZONE button. Select the GROUP No. -
Page 9: How To Start Collective Operation
How to start collective operation To start collective operation (ALL or ZONE) Stop Power Turn the power supply switch on 5 hours or more before starting operation. Press the SELECT button and select ALL or ZONE. In case of ZONE collective operation. Select the ZONE No. - Page 10 DC0911-11111 Printed in Japan...