Canon VB101 User Manual page 49

Log Messages
A033 Invalid file detected during picture index restoration (info)
broken file detected: %1
Message
File name
%1
Explanation A file was detected during picture index restoration that is not a recorded picture.
Delete any invalid files. This does not affect picture index restoration processing.
Response
A034 Recorded picture file read error during picture index restoration (info)
picture file I/O error: %1
Message
File name
%1
An error occurred while a recorded picture file was being read during picture index restoration processing.
Explanation
Check the contents of the file. This file is not included in the picture index.
Response
HTTP Server Log Messages
H011 File specification error (notice)
HTTPD: File does not exist: %1
Message
File name
%1
The specified file was not found.
Explanation
Check the URL and file. (If the URL is "/opt/..." the file is on a memory card in "/card/htdocs/...).
Response
If the URL is not "/opt/...", the file is on the internal file system in "/htdocs/...".)
If there is no error, the file system must be repaired.
Card Slot-related Log Messages
P001 File system mounting failure (warning)
AUTOMNT: %1 already mounted or %2 busy
Message
%1 Device name
Mount point
%2
Explanation Two memory cards are inserted together or the memory card cannot be mounted
because an error occurred when it was last unmounted.
If the card cannot be mounted because an error occurred when it was last unmounted, reboot.
Response
P002 Mount number exceeded (err)
AUTOMNT: mount table full
Message
Explanation The mount entry table is full.
This can occur when unmount errors are repeated.
Reboot.
Response
96
P003 Memory card error (warning)
AUTOMNT: cannot mount %1 on %2
Message
Device name
%1
Mount point
%2
Explanation Mount processing was cancelled due to a memory card error.
Replace the memory card.
Response
P004 Device busy (err)
AUTOMNT: %1: device is busy
Message
Device name
%1
Explanation The card was unmounted during file access. This does not occur during normal operation.
If this occurred when administration tools were used to unmount the card, reboot.
Response
P005 Card initialization failed in card slot A (warning)
ENABLER:slota enable err
Message
Explanation Card information read from the card inserted in card slot A failed.
Re-insert the card or replace the card.
Response
P006 Card initialization failed in card slot B (warning)
ENABLER:slotb enable err
Message
Card information read from the card inserted in PCMCIA slot B failed.
Explanation
Re-insert the card or replace the card.
Response
P009 Memory card read error (err)
PCMCIA ATA Card(Slot%1 sector %2): Read Sector Error
Message
%1 Slot (A|B)
Sector number
%2
Explanation A sector read error occurred. The card may be damaged.
Check the memory card and, if necessary, reformat the card.
Response
If there is a physical fault on the card, replace the card.
P010 Memory card write error (err)
PCMCIA ATA Card(Slot%1 sector %2): Write Sector Error
Message
%1 Slot (A|B)
Sector number
%2
A sector write error occurred. The card may be damaged.
Explanation
Check the memory card and, if necessary, reformat the card.
Response
If there is a physical fault on the card, replace the card.
Log Messages
6
97