Buffalo WCR-G300 User Manual page 37

Chapter 3 Configuration
Parameter
Exclusive SSID for WEP
Dedicated WEP SSID isolation
AOSS Button on the AirStation Unit
Current Encryption Information
AOSS Connection only
[Random]
[Reset]
AOSS Client Information
AOSS Connection only
WCR-G300 / WCR-HP-G300 User Manual
Meaning
Initiates AOSS automatic wireless configuration. Click this, then
press or click the AOSS button on your AOSS-compatible wireless
client. Repeat for additional AOSS clients.
Click this button to disconnect AOSS connections.
Note : If AOSS connections are disconnected, the SSID and encryption
keys will be restored to their most recent settings before using
AOSS.
You may allow a separate SSID for WEP connections. If this is
disabled, clients will not be able to connect with WEP.
Set a separate SSID and network segment specifically for WEP
connections. Devices connected with WEP will not be able to
communicate with devices connected using AES. All connected
devices will be able to communicate with the internet.
If enabled, AOSS will be initiated when the physical AOSS button is
pressed. Disable to prevent the button from initiating AOSS.
Displays the type of encryption, SSID, and encryption key that AOSS
has configured.
Click to enter random values for SSID, encryption key, and other
settings.
Click to return the SSID, encryption key, and other wireless settings
to their previous values.
Displays status of connected AOSS clients.
36