Install The Ink Cartridges; Check The Print Quality - Brother DCP-585CW Quick Setup Manual

5

Install the ink cartridges

WARNING
If ink gets in your eyes, wash them out with
water at once, and if irritation occurs consult a
doctor.
a
Make sure that the power is turned on.
b
Open the ink cartridge cover.
c
Remove the green protective part.
d
Unpack the ink cartridge.
e
f
Take care to match the colour of the lever with
the cartridge colour.
g
Install each ink cartridge in the direction of the
arrow on the label.
h
Gently push the ink cartridge until it clicks. After
all the ink cartridges are installed close the ink
cartridge cover.
6

Check the print quality

a
.
Set Paper and Press
Start
Press Colour Start.
b
Check the quality of the four colour blocks on
the sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press
to finish the quality check.
If you can see missing short lines, press
(No) and go to d.
d
The LCD asks you if the print quality is OK for
black and colour. Press
e
Press (Yes), the machine will then start
cleaning the colours.
f
After cleaning is finished, press Colour Start.
The machine starts printing the Print Quality
Check Sheet again. Go back to b.
(Yes)
(Yes) or (No).
3