NETGEAR MBR1515 User Manual page 8

Table 1 describes each LED and button on the front panel of the router.
Table 1. LED descriptions
LED Activity
WPS Press the WPS button to open a 2-minute window for the router to connect with other
WPS-enabled devices. For more information about this function, see
(WPS) to Configure Your Wireless Network
Wireless On/Off This button can be used to control the WiFi radio or both the WiFi radio and mobile broadband
radio. Use the router interface to select the options. The default is set for WiFi radio only.
Power Solid green
Solid amber
Off
Internet Solid green
Blinking green
Blinking green and amber There has been a failover from WAN to mobile broadband.
Off
WiFi Solid blue
Blinking blue
Off
LAN Solid green
Blinking
Off
WAN Solid green
Blinking
Off
4G LTE Solid blue
Off
LTE Broadband 11n Wireless Router MBR1515
Description
The router is turned on and operating normally.
There has been a power-on self-test failure or device failure.
Power is not supplied to the router.
There is an Internet session.
Data is being transmitted over the Internet connection.
No Internet connection detected.
The WiFi local port is initialized.
Data is being transmitted or received over the WiFi link.
The wireless access point is turned off.
The local Ethernet ports have detected wired links with computers.
Data is being transmitted or received.
No link is detected on these ports.
The Ethernet WAN port has detected an active link.
Data is being transmitted or received.
No link is detected on these ports.
The router is in 4G LTE coverage.
No coverage is detected.
Connect to the Internet
8
Use Push 'N' Connect
on page 29.