Change The Administrator Login Time-Out; Run Diagnostic Utilities And Reboot The Router - NETGEAR MBR1515 User Manual

Lte broadband 11n wireless router

Hide thumbs Also See for MBR1515:

Table of Contents

From the main menu, select Maintenance > Set Password.

To change the password, first enter the old password, and then enter the new password

twice.

Click Apply to save your changes.

Note:

After changing the password, you must log in again to continue the

configuration. If you have backed up the router settings previously,

you should do a new backup so that the saved settings file includes

the new password.

Change the Administrator Login Time-Out

For security, the administrator login to the router configuration times out after a period of

inactivity. To change the login time-out period:

In the Set Password screen, type a number in the Administrator login times out field.

The suggested default value is 5 minutes.

Click Apply to save your changes, or click Cancel to keep the current period.

The router has a diagnostics feature. You can use the Diagnostics screen to perform the

following functions from the router:

•

Ping an IP address to test connectivity to see if you can reach a remote host. If Ping VPN

is enabled, the ping packet always goes through the VPN if the VPN tunnel is enabled

and working.

•

Perform a DNS lookup to test if an Internet name resolves to an IP address to verify that

the DNS server configuration is working.

•

Display the routing table to identify what other routers the router is communicating with.

•

Reboot the router to enable new network configurations to take effect or to clear problems

with the router's network connection.

LTE Broadband 11n Wireless Router MBR1515

Manage Your Network

Table of Contents