Operating Your St9400S; Choosing The Operating Mode; Hot Water - Honeywell ST9400S User Manual

OPERATING YOUR ST9400S

Choosing the Operating Mode

The operating mode may only be changed when the slider is set
to the RUN position.
A green INDICATOR LAMP shows when the heating or hot
water is switched ON.
Two MODE buttons are provided to select the Operating Mode
and therefore how the heating and hot water are controlled.
Heating has four possible Operating Modes; these are OFF, AUTO, ONCE, CONT.
Pressing the heating MODE button scrolls round these modes in sequence, and the
display indicates which mode is currently active.

HOT WATER

• OFF mode
The heating will remain OFF.
• AUTO (Automatic) mode
The heating will be switched ON and OFF according to the heating programme.
• ONCE mode
The heating will come ON at the first programmed ON time, and go OFF at the
last programmed OFF time.
• CONT (Continuous) mode
The heating will remain ON continuously.
The hot water MODE button operates in the same way as described above for the
heating MODE button.
10
(for Heating and/or Hot Water)
HEATING
DAY/TIME
HOT WATER
HEATING
HOT WATER HEATING
RUN