Table 5-1: Status > Report Fields - Honeywell NetAXS-123 User Manual

File Management
Generating Reports
3. Use the descriptions in
126 www.honeywell.com
Table 5-1
Table 5-1: Status > Report Fields
Setting Description
Date/Time [ID] Provides the date and exact time the event was generated,
according to the panel's time.
Card Holder Name Identifies the card holder.
Card Num Specifies the unique number by which the card holder may
be identified.
Device Name [ID] Identifies the device that generated the event.
LN Logical Device Number
that is assigned to an alarm generating point. This number
is never duplicated either on a Controller or its attached 1-
or 2-Door
Readers. For a list of common values, see
PN Physical Device Number
that is assigned to a specific alarm generating point.
NetAXS-123 Controller starts at 1 and goes to 8, 1-Door
I/O board
board
are not board-specific will report a value of 0. There is one
exception to this: Door Readers. For a list of common
values, see
Code Identifies the current transaction generated by the card. For
example, the possible transactions could include:
• Card Found
• Card Not Found
• Time Zone Violation
PIN/Site Identifies either the PIN or the site code number of the card.
Only used to report an event that has an invalid Site Code
or invalid PIN.
to read the event records.
- A unique number starting at 1
I/O board
. There is one exception to this: Door
- A number at the board level
as a new board goes from 1 to 4, and 2-door
goes from 1 to 8. System alarms such as reset which
Table 4-2.
Table 4-2.
I/O