Figure 2-22: Cards > Add; Table 2-10: Cards > Add Cards Fields - Honeywell NetAXS-123 User Manual

Click
Cards > Add
Figure 2-22: Cards > Add
: Use the field descriptions in
Steps
Add Card(s)
Table 2-10: Cards > Add Cards Fields
Field
Card Number(s)
Card Holder Name
Card Type
NetAXS-123 Access Control Unit User's Guide, Document 800-05168, Revision B
to display the Add New Card(s) screen:
:
Description
Specifies the unique number by which the card holder will be
identified. A card number is required.
Identifies the card holder. A card holder first and last name is
required. Each name can have up to 15 characters for the first name
and 20 characters for the last name.
Specifies whether the card holder is a Supervisor, Employee, or a
VIP. A temporary (Temp) flag can be set for each type of card holder.
When the Temp flag is enabled, the expiration date becomes an
active field. Note that the Temp box is active when the panel is
configured for visitor cards in Configuration > System > General
(see General Tab,
Configuring via the Web Server
Table 2-10 to complete the card fields and click
page 21). A card type is required.
Maintaining Cards
57