Manual Installation - Buffalo AirStation WHR-HP-G54 User Manual

To install the AirStation manually,
1. Power down the Cable or DSL modem and the computer which will be used to
configure the AirStation router.
2. Plug the Cable or DSL modem's Ethernet cable into the AirStation's WAN port.
Initially, you may need to unplug this cable from your computer, hub or other router.
3. Plug the provided Ethernet cable into one of the four LAN ports on the AirStation and
plug the other end into your computer's Ethernet adapter (NIC).
4. Important: turn everything on in the correct order!! Power on your cable or DSL modem
and wait one full minute, then power on the AirStation and wait one full minute, and
finally power on the computer which will be used to configure the AirStation.

Manual Installation