Buffalo AirStation WHR-HP-G54 User Manual page 65

Configuring a WDS Bridge
Hexadecimal Input - 26 digits (Hex WEP128 104 bit, key should contain 26 characters
A-F, 0-9)
Hexadecimal Input - 10 digits (Hex WEP64 40 bit, key should contain 10 characters A-F,
0-9)
Enter at least one encryption key in the first encryption key space. The key should
match the format of the chosen WEP encryption type. Additional keys may be entered in
boxes 2, 3, and 4.
Click Apply when finished!
After configuring the bridge (the second AirStation) for WEP, log into the first AirStation's
Web-Based Configuration Utility (192.168.11.1) and make exactly the same changes
to the WEP settings. All WEP configuration settings must be exactly the same, or the
AirStations will not be able to communicate.
Each wireless client that will connect to the AirStations must also be configured with the
exact same WEP encryption key type and encryption key. Consult your wireless client's
documentation for more information on configuring its WEP settings.
Once everything is working smoothly, change the admin password of both AirStations to
something different from the default blank password. Store the new password in a safe
place! You will not be able to access your network settings without it.