Logs - GE Digital Energy 1018959 Operating Manual

adapter may be severely affected by a corrupted configuration file. In any case the procedure is
described below:
•
Transfer the new configuration file (gedeups.cfg) to the device using ftp or sftp
•
Update the configuration by injecting the nvupdate command at the console
•
Reboot the system to begin using the new configuration

10.3 LOGS

The SNMP/Web adapters maintain a log of the user activity (System log) and a log of UPS alarms (UPS
log). The logs can be accessed over the web interface (Log section) or over the console interface (syslog
and upslog commands). The logs can also be stored in a file and downloaded from the adapter. In order
to download the log files, inject the logdump command at the console. This will create ups.log and
sys.log in the FTP area. The files can then be downloaded via ftp or sftp.
Modifications reserved
OPM_CNT_SNM_BAS_CRD_1GB_V014.doc
Page 63/69
Operating Manual SNMP/Web Adapter