Time Command Group - GE Digital Energy 1018959 Operating Manual

2.2.6 Time command group

The time command group allows to enable/disable different services. Note that the local (serial)
connection cannot be disabled.
Command Parameters
showtime
ntponoff on | off
ntp-server [hostname]
ntpdate
tmzone (*)
settime MMDDhhmm[[CC]YY][.ss]
(*) By running the tmzone command, an interactive menu is launched – follow the on-screen
instructions.
NOTE: When using the local serial connection, make sure that the terminal emulation is set to VT-100,
otherwise the interactive menu may not be rendered correctly.
Modifications reserved
OPM_CNT_SNM_BAS_CRD_1GB_V014.doc
Description
Show all configured time settings
Enable/disable NTP client
on NTP client enabled
off NTP client disabled
Define NTP server
[hostname] hostname or IP-address of the NTP server
NOTE: using hostnames requires DNS connection.
Force clock synchronisation with NTP server
Set the time-zone.
NOTE: the time-zone controls both the time difference with
respect to GMT and the daylight-saving settings. As the
time-zone is specified as a Region/Country pair, selecting
the correct time-zone will ensure that the adapter
computes the correct time.
Set the date & time
MM month
DD day
hh hour
mm minute
[CC]YY year
ss seconds
Page 19/69
Operating Manual SNMP/Web Adapter