Table of Contents
Advertisement
Chapter 5 Home Network Configuration
3
Click Security. The Wireless -- Security screen opens.
4
In the Network Authentication field, select WPA Personal or WPA2 Personal
from the drop-down list.
5
Select Enabled or Disabled to enable or disable your Serial Number Encryption
function. Your serial number is printed on the back label of your device. If you
enable this function, the system will automatically use your serial number as the
pre-shared key for WPA Authentication.
6
In the WPA Pre-Shared Key field, enter a shared Key (8-63 characters). The
system will periodically generate a dynamic key based on the shared key.
7
In the WPA Group Rekey Interval field, enter the group key renewal time period
(in seconds). This time defines how often the dynamic key is regenerated
8
In the WPA Encryption field, select the encryption from the drop-down list. You
have the option of choosing TKIP (Temporal Key Integrity Protocol), AES
(Advanced Encryption System), or both. Typically AES is seen to be a more
reliable form of encryption.
9
Click Save/Apply to save your settings.
142
4036168 Rev A
Advertisement
Table of Contents
