Fujitsu ETERNUS DX80 S2 User's Manual & Installation Instructions page 117

Chapter 5 Setup
5.1 Basic Setup
3
Select the "Host Group", the "CA Port Group", and the "LUN Group" that are to be associated.
3-1
Click the [Browse] button in "Host Group".
A screen to select the host group appears.
3-2
Select the connection target from "Host Group" or "All" in "Target Connection".
To allow all of the hosts to recognize the LUN group, select "All" for "Target Connection".
-
-
3-3
Click the [Browse] button in "CA Port Group".
A screen to select the CA port group appears.
3-4
Select the CA port group that is to be associated and click the [OK] button.
The name of the selected CA port group is displayed in "CA Port Group".
3-5
Click the [Browse] button in "LUN Group".
A screen to select the LUN group appears.
3-6
Select the LUN group that is to be associated and click the [OK] button.
The name of the selected LUN group is displayed in "LUN Group".
4
Check the path between the host and the host interface port on the ETERNUS DX Disk
storage system in [Host - CA Port Connection], and click the [Create] button.
A confirmation screen appears.
5
Click the [OK] button.
The host affinity is created and the registration completion screen appears.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Installation-
When "Host Group" is selected
Select a host group to be associated with a host affinity, and click the [OK] button.
When "All" is selected
Select a host response, and click the [OK] button.
Copyright 2013 FUJITSU LIMITED
117
P3AM-4832-07ENZ0