Adding A New Contact - Cisco Small Business SPA525G2 User Manual

Using Basic Phone Functions
Using the Phone Directories
STEP 1
STEP 2
TIP
STEP 3
TIP
STEP 4
STEP 5
Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide
Use the Down Arrow key to scroll through entries in the address book. Use the
Right Arrow key to scroll through the phone numbers available for the highlighted
contact.
You can also view and edit the directory from your PC by using the phone web
user interface. See the
page 85.

Adding a New Contact

To add a new entry to the directory:
In the Personal Address Book screen, press Add.
Use the keypad to enter the name of the directory entry. When finished with the
name, use the Down Arrow key to navigate to the other fields.
To enter numbers and letters, press Option and select Input All. To enter only
numbers, press Option and select Input Num. To clear all characters from an entry,
press Option and select Clear.
Enter the office, mobile, or home phone number, including any digits you must dial
to access an outside line and the appropriate area code, if necessary. You must
enter at least one phone number for a contact.
To enter numbers and letters, press Option and choose Input All. To enter only
numbers, press Option and select Input Num. To enter an IP address, press Option
and select Input IP. To enter a star code, press Option and select Input Star Code.
(See "Using Star Codes," on page
Option and select Clear.
(Optional) To change the ring tone for the caller:
a. Press the Right Arrow key to enter the Select Ring Tone screen.
b. Scroll through the available ring tones.
c. Press the Play button to play the selected ring tone or the Select button to
assign that ringtone to the person whose number you are adding to the
directory.
Press Save to save the entry.
"Configuring Your Personal Address Book" section on
77.) To clear all characters from an entry, press
3
48