Adjusting Call Volume And Muting; Adjusting Call Volume; Using Mute; Putting A Call On Hold - Cisco Small Business SPA525G2 User Manual

Using Basic Phone Functions

Adjusting Call Volume and Muting

Adjusting Call Volume and Muting

Putting a Call on Hold

Resuming a Call

Ending a Call

Cisco SPA525G and Cisco SPA525G2 SIP IP Phone User Guide

Adjusting Call Volume

To adjust the volume while you are on a call, press + on the Volume button to
increase the volume, or press - to decrease the volume. Press Set.
Pressing the Volume button while not on a call adjusts the volume of the phone
ringer.

Using Mute

To mute the phone microphone, speaker, or headset microphone, press Mute. The
button lights red. Press Mute again to unmute.
To put a call on hold, press the Hold button/Hold softkey. A series of beeps
indicates the call is on hold.
To resume a call, press the Resume softkey or the flashing red line button for the
call or the Hold hardkey. If you have multiple calls, all calls are put on hold except
the active call.
To end a call:
• If you are using the handset, hang up or press the EndCall softkey.
• If you are using the speakerphone, press Speaker.
• If you are using the headset, either press the Headset button (wired) or replace
the receiver (wireless).
3
38