Step 4: Connect To A Device And Configure Network Settings; Connecting To Or Disconnecting From Devices - Honeywell HD4 EQUIP Series User Manual

Installing the Honeywell IP Utility and the Web-Client Software

Step 4: Connect to a Device and Configure Network Settings

Connecting to or Disconnecting from Devices

38
When you log on to the IP Utility, the devices on the network—including the devices on
other subnets—are automatically discovered and are listed in the Discovery pane. After the
initial discovery, auto-refresh continues to discover devices that are newly added to the
network.
You can also manually refresh the device discovery by clicking the Discovery icon (
located near the top of the Discovery pane.
Before configuring the IP network settings, you must connect to the IP device.
Connecting to a Device
You can connect to individual Web-Client applications for each discovered device.
• In the Discovery pane, double-click the device to which you want to connect.
-OR-
• Select the device, then click the Connect
The network settings for the connected device display in the System pane.
Disconnecting from a Device
In the Discovery pane, select the device, then click Disconnect
Note If you disconnect the device without saving configuration details, a warning
dialog box displays. Click Yes to save and disconnect, or click Cancel to
discard the changes and disconnect the device.
button.
.
),