Using the IP Camera with Cisco VSM
Cisco Video Surveillance Manager (VSM) is a suite of powerful and flexible video surveillance
applications that interoperate with a wide range of devices and cameras to provide a complete,
standards-based video surveillance solution. VSM consists of modules to manage, archive, view, and
distribute video.
The following guidelines apply when you use the IP camera with VSM:
Obtaining the Required Driver Pack
•
To use the IP camera with VSM, you must download and install a driver pack. For information about
this driver pack, refer to your VSM documentation, which is available here:
http://www.cisco.com/web/solutions/ps/products.html#netcentric
The IP camera must be installed and configured as described in
•
You must to create a separate user account with administrator privileges for each Media Server.
•
Configuration connections for a Media Server are limited just as they are for user sessions. Viewing
and managing video streams from VSM requires administrator-level privileges.
For information about how to configure a user account, see the
page
•
A user with administrator privileges cannot be logged in to the IP camera and use VSM at the same
time
•
Cisco recommends that you configure video resolution (NTSC or PAL) from the IP camera
configuration windows.
For instructions, see the
OL-19273-02
3-19.
"Video Window" section on page
A P P E N D I X
Chapter 2, "Getting Started."
"Video Window" section on
3-19.
Cisco Video Surveillance 2500 Series IP Camera User Guide
A
A-1